 |
|
Please note that panel weights are
for indication only.
Due to tolerances which may be present at all stage of manufacturing
processes for all panels’ composants, there can be variation in the
actual panel weight. For this reason, as per the industry “best
practice”, Tecsedo recommends to first measure the weight of the panel
used in the manufacturing of each door, in order to make certain the
choice of the correct spring.
|
|
TECSEDOŽ
SAFE eXtra
DESCRIPTION
The levelled external side
on the whole panel surface giving the most prestigious appearance to
residential doors, is emhpasised by the attractive Polygrain finish:
resistant polyammidic paint with rising micfrograins (see rear of this
leaflet). Internal face can be either in standard or “K”version
(different distances between micro ribs: see specs. for Micro version).
The panels are made with a specially fitted closure, specifically made
to prevent the accidental jamming of fingers or foreign bodies in the
joint of the panel, during the closing of the door (according to EN
12604). Repeated opening and closing of the doors is always assured as
is the excellent long-lasting resistance to extreme weather conditions:
doors made with our TECSEDOŽ SAFE eXtra panels, together with a major
hardware components supplier, have succeeded the C€-certification,
being tested and approved
by SP Swedish National Testing and Research Institute, in accordance
with EN13241-1; with these results, by a simple application procedure,
our customers can obtain a faster C€ certification: for further
information, please contact us.
|
|
